Specification: 1. L x W x H : 93.5 X 60 X 17 mm Net weight is 70g without package.
2. Measureable battery type and amount: Li-Polymer/Li-Fe 2 ~ 6 Cell(standard voltage 7.4 V ~ 22.2 V using divided voltage joint)
3. Receiver battery 1.2 V ~ 8.5V DC (No limit battery type, but need external power source 7.4~11.1V, use JST joint)
4. Balance voltage setting range(lower limit) : 2.0 V ~ 3.9 V(pre-setting value 3.2 V)
5. Discharge voltage setting range (lower limit) : 3.0 V ~ 4.2 V (pre-setting value 3.9 V)
What is all above? The perfect Balance devive that you ever met!
Sort Description: The Battery Meter/Balancer/Discharger is designed for Li-Polymer and Li-Fe battery, it can measure battery voltage precisely and execute balance work for series batteries, or for battery discharge in order to for long time storage to avoid battery damaged. It can be used as a portable battery meter as it is lightweight, self-contained and with a large display. You can also bring the Balancer to the flying field for battery checking purpose.
The product balance function can allow battery execute balance function before/after charge and using(discharge), also can match-up market string voltage charger to execute devide voltage balancing function while charging.
The product is used big size screen, it can show 6 cell batteries condition. It only uses 3 key to control all function, user can judge batteries condition soon, and can operate all function single-handed.
What it Does: -BALANCE YOUR LIPO AND LIFE BATTERY PACK UP TO 6 CELLS -BATTERY CHAECKER FOR RECEIVER BATTERY PACKS -STORAGE OPERATION FOR YOUR LIPO & A123 BATTERY PACKS
More Specification, please.. -Thermal-backplane ventilation design, to prevent overheating. -Backplane heat, dust invasion can be avoided, better heat dissipation effect. -Don't worry about the temperature when the unit is in operation. -Supports 2 ~ 6 Cell Balancing tabs -Allows Li-Polymer/Li-Fe 2 ~ 6 Cell balancing and discharge -Included JST connectors and Another receiver power connectors.
Precautions:
MKS 3 IN 1 Battery Balancer LCD display monitor This product comes with temperature sensor IC control, When the temperature inside exceeds 75°C. It will goes back to discharge when the temperature inside is lower than 65°C. It will shutdown discharge for a while. Net weight is 70g without package.
What's in the Box: 1 x Battery Balancer 3:1 (with Lipo Power) 2. JST connectors & Receivers power connector 3 x English Manual
BATTERIES 
![thumbnail_MKS_3in1_balancerLCD_02[1].jpg](/images/product_images/thumbnail_MKS_3in1_balancerLCD_02[1].jpg)
![thumbnail_o003[1].jpg](/images/product_images/thumbnail_o003[1].jpg)
![thumbnail_o001[1].jpg](/images/product_images/thumbnail_o001[1].jpg){kind=small}
