Hobbywing LCD Programm Box for Xerun, Ezrun and Platinum ESC

Features:
- Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen.
- Works as an USB adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC by HOBBYWING USB LINK   SOFTWARE
- Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell.

Specifications:
Input Voltage: 4.5-12.6V (If the ESC hasnt a built-in BEC, you must use an additional battery pack to supply the program box)
Displayer: 16x2 characters LCD.
Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)
Size: 90mm (L) * 51mm (W) * 17mm (H)
Weight: 65g

This Multifunction LCD Program Box is suitable for the following ESC:
XERUN & EZRUN series Car ESC (Version 2.0 and 2.1)
XERUN-120A V3 & V3.1 ESC
PLATINUM series helicopter/aircraft ESC
PLATINUM V3 series helicopter/aircraft ESC

A) The programmable items for the XERUN and EZRUN series car ESC:
Running Mode
Drag Brake Force
Low Voltage Cut-Off Threshold
Start Mode
Maximum Brake Force
Maximum Reverse Force
Initial Brake Force
Throttle Neutral Range
Timing Over-Heat Protection
Motor Rotation
Lipo Cells Amount

*Note: Some speed controllers have less programmable items, but some have more. Please read the user manual of your speed controller to get detail information.

B) The programmable items for the PLATINUM series airplane ESC:
Brake
Battery Type
Low Voltage Protection Mode (Cutoff Mode)
Low Voltage Protection Threshold (Cutoff Threshold)
Start Mode
Timing
Governor Mode
Reserved Item #1
PWM Frequency
Built-In BEC Output
Reserved Item #2
Lipo Cells Amount

C) The programmable items for the PLATINUM V3 series airplane ESC:
Brake
Battery Type
Low Voltage Protection Mode (Cutoff Mode)
Low Voltage Protection Threshold (Cutoff Threshold)
Flight Mode
Autorotation Restart Time
Timing
PWM Frequency
Built-In BEC Output
Lipo Cells Amount

What you Get:
1 x Hobbywing Program LCD Box